Side is the handle

The side fixed shank series USES the side fastening screw to fasten the knife rod to the shank hole, and provides the protection function of pulling out, so it is very suitable for heavy processing operation.

It heats the handle

The hot expansion shank provides a high precision and strong clamping force, which is the most delicate way to hold a round knife, and they do not have to use extra clamping screws or nuts. Compared with the tool bar, the hole of the holding cutter is slightly smaller. Heating the handle can make the inner hole (using special heater, mountain high EasyShrink ®) inflation, allowing the tool insert. When the handle cooling, inner hole will be around 360 ° contraction tool, resulting in a convergence effect of rigid clamping inward. This can be achieved by more cutting depth and larger worktable feed volume to achieve higher material cutting rates.

Hydraulic chuck

Hydraulic chuck can provide powerful clamping force, and at three times the diameter can provide up to 3 (including m beat quantity (4 (including standard (including 3 m, heavy-duty, slender type (including 5), which makes them become the excellence of high speed machining and rough machining and finish machining applications solutions. As a new slim model, EPB 5831 can even allow users to perform semi-finishing and finishing in narrow Spaces such as narrow mold cavity easily.

This tool is easy to operate and can be clamped with a pressure screw. Internal piston hydraulic oil into the handle hole cavity around the indoor, evenly apply high voltage at 360 ° implementation tool rod clamping. This can hold knives with excellent precision.

The precise balance is the standard configuration of the hydraulic chuck, which can speed up to 40,000 RPM. The stop screw allows the tool’s suspension length to be set easily, while the variable diameter sleeve with a seam sleeve allows the hydraulic clamps to hold more types and specifications of the pole, including Weldon and Whistle Notch.

In order to extend tool life and improve accuracy, there is a spiral groove on the hole wall to collect dirt, oil, or grease that is accidentally left on the tool bar.

Universal – single-diameter bit

General-purpose solid carbide bits provide multi-functional and lower inventory costs for small and medium size production.

This series adopts multi-purpose drilling groove with four flat surfaces, which can realize excellent centering ability and maintain the it8/9 hole tolerance and can be easily re-ground. The drill is also used for polishing the AlCrN coating, which provides excellent wear resistance, excellent toughness and excellent anti-chip function. These drills can be used with Threadmaster tap and can be matched with Precimaster Plus for prehole processing.

The drill adopts advanced coating technology and general groove type, which is suitable for most applications of the quality of the hole. They can efficiently drill steel, stainless steel, cast iron and other materials.

General series and comes with EPB ™ thermal handle, EPB hydraulic chuck and EPB high-precision spring collet tie-in use cylindrical cutter bar (R1). It provides the model of the 5xD internal cold channel, the model 3xD cold channel and the 3xD no internal cold channel model.

The diameter range is 3-20 mm

Other sizes can be provided by the customer.

Small diameter bit

The company adopts the special product combination of SD22 and SD26 series solid carbide microdrill bit to meet the needs of micro-drilling application. These series are suitable for small parts production in automotive and medical industry applications and general engineering manufacturing industries.

SD22 is a miniature fixed drill with a depth of 2xD, with a diameter increment of 0.01 mm and a diameter tolerance of 0/+ 0.005mm. The pole is 3 mm and has h6 tolerance. SD22 bit uncoated, with a 130 degree Angle of drill.

SD26 is a miniature drill with a depth of 6xD, with a diameter increment of 0.01 mm and a diameter tolerance of 0/+ 0.005mm. The pole is 3 mm and has h6 tolerance. The SD26 bit is uncoated and has a sharp Angle of 130 degrees.

Compared with the traditional HSS bit used today, the performance of the SD22 and SD26 bit has improved significantly. Include high productivity, significantly extended tool life and lower unit cost.

Diameter range is 0.1-2 mm (0.004-0.078 in)

Other sizes can be provided by the customer.

FEEDMAX – chamfering bit

Feedmax chamfering bit will combine drilling process and chamfering process to achieve high efficiency. Standard inventory series is suitable for pre-drilling applications of M4 to M16 common standard metric thread.

These drills have minimized each hole cost with a design that maximizes productivity. The self-centering groove is used 45 degrees (90 degree contains Angle) chamfering to provide excellent hole quality. The unique TiAlN coating can provide high thermal hardness and combine with a powerful cutting edge to ensure long and predictable tool life.

The diameter range is 3.3-14.5mm (0.130-0.570 in), and the drilling depth is 3XD

Other dimensions, chamfer Angle and length can be provided by the customer.

FEEDMAX – interrupted cutting bit

Feedmax SD245A solid carbide bit has high stability and overall improved machining performance for the hole machining with irregular resection and perforation cutting.

These drills with four edges, with optimization of the pilot drill tip, enhanced edge grinding and high wear-resisting TiAIN + TiN coating, allows users to easily implement good hole geometry size and IT8 and IT9 ISO tolerance.

The diameter range is 5-14 mm (0.197-0.551 in), and the drilling depth is 5XD

Other sizes can be provided by the customer

 

FEEDMAX – IT 7 high – precision bit

Feedmax SD265A IT 7 high precision bit can provide perfect precision. Through optimizing bit groove, six blade belt, optimize the pilot drill tip, the strict manufacturing tolerance (+ / – 3 (including), low friction TiAIN coating, and excellent wear resistance, high mountain Feedmax SD265A a feeding can work out the quality of IT7 hole, this not only saves the cycle time, but also save the cost. In addition, a SD265A bit can replace multiple knives and simplify complex drilling tasks.

The diameter range is 6.006-16.009mm

Other sizes can be provided by the customer.

 

FEEDMAX – composite material bit

Two different compound drilling solutions are provided: diamond coating bit and polycrystalline diamond (PCD) bit. These tools are optimized for ordinary composite or laminated materials.

Solid carbide drill bit

Drilling

The company offers a complete range of drilling products, including solid carbide bits, replaceable hard alloy drilling tips and indexable insert bits. This broad product portfolio provides solutions to various applications and artifact materials in all industries, including automotive, energy, healthcare, etc.

With optimized coating, drilling grooves and blade design, the drill can produce high quality holes with first-class productivity.

The diameter range is 0.1-160 mm (0.004-6.299 in), and the aperture tolerance is IT7 to IT12.

Solid carbide drill bit

In a wide range of solid carbide drill bit product portfolio with a wide range of channel, coating and diameter, can be in steel, and other artifacts of laminated composite materials, refractory materials exhibit excellent performance in the materials. With the diameter of 0.1mm (0.003 in), our drill series can be used in many applications in various industries, such as medical and aerospace.

Optimized slot types provide options for challenging application situations, including irregular exit shapes. With these tools, you can use high feed and high cutting speed, and obtain precise hole tolerance by using groove type suitable for workpiece material.

The diameter range is 0.1-20 mm (0.003-0.787 in), and the aperture tolerance is IT7 to IT12.

Single-diameter bit

Seco Feedmax integral hard alloy bit has advanced hard alloy technology, coating technology and groove technology unique combination.

Feedmax aims to achieve high productivity and low cost per hole, which can provide up to 0.70 mm/rev (0.027 IPR) feed rate and up to 220 m/min (721 SFM) cutting speed. With excellent centering ability, excellent drilling quality can be achieved without central drilling. Thanks to the TiAlN coating with high thermal hardness and strong cutting edge, long and predictable tool life can be realized.

Feedmax bit USES high strength carbide tool bar to minimize fracture risk, while low friction coating (TiAlN) improves the ability of cuttings. In addition, the protective knife edge Angle has further improved the application security.

Feedmax contains a wide variety of drill bits, can be used in many different workpiece materials and applications, including: M trough type for high temperature alloy, used for titanium alloy and aluminum alloy type T slot, and N type slot for aluminum alloys and non-ferrous alloys. The drill bit provides 3.5xD and 7xD length with a diameter of 2-20 mm (0.078-0.787 in). The diameter of the small diameter bit series is 0.7-2.0mm (0.028-0.079 in), and the length of 6xD is also provided. Other sizes can be provided by the customer.

High feed mill

The high feed mill is a kind of milling method, which is three times faster than the conventional method.

It makes shallow cutting depth for the high feed on each tooth, thus increasing the removal rate of the metal and causing more parts to be processed. The direction of the cutting force is axial machine spindle, which means greater stability and less vibration, extending tool life. In addition, high feed milling tools save time, avoid semi-finishing and reduce tool changes.

Our wide range of high feed grinding solutions meet all application requirements. In addition, with the help of knowledgeable and experienced team, you can seamlessly implement high-speed milling technology to improve your productivity and competitiveness.

High feed milling process is used to provide perfect platform for further processing or final processing. In most applications, you usually get such good tolerances that only final completion is required.

High feed milling is also very practical and can be machined into uneven surface, which has a high effect in cavity milling and die making. Using profile milling and cavity milling, the application indicates the tool diameter requirement, making it easy to choose the right tool.

Highfeed 4-4-front, double-sided insertion

Cutting range 20-63 mm (1-2.5 inches)

Use the row insert type

The maximum depth is 0.9 mm

Selection of ISO P & K materials for small and medium sized machines

 

Highfeed 6-6 – front edge, double-sided insertion

Cutting range 40-160 mm (2-4 inches)

Use the insert type 218.21

The maximum depth is 1.8 mm

The first choice of ISO P & K materials for medium – sized machinery

 

High feed mill – 3 tip, single side insertion

Cut range 16-208mm (. 75-4 inches)

Use the insert type 218.19

Insert maximum depth: 080/0.6mm, 100/0.7mm, 125HA / 1.5mm, 160/1.8mm,160C / 2.5mm

For general-purpose applications,

 

For SCET12 insert high feed factory – 4 tip, single – side insertion

Cutting range 50-125 mm (2-4 inches)

Maximum cutting depth of 2 mm (. 078 inches)

Use SCET 120630 to insert into the high feed application

High torque machine

 

High feed double octagon insert knife – 16 tips, double – side insertion

Cutter range 80-160 mm (3-6 inches)

Maximum cutting depth of 2 mm (. 078 inches)

Facing the application

Double sided insert

The circular insert cutter of general copying milling cutter. Double sided insert

Our double-sided round insertion and cutter, r217/220.28, is suitable for the light imitation milling, face milling, milling and side milling of all workpiece materials.

In screw interpolation, high feed milling is suitable for making large diameter holes because it usually means skipping preprocessing or pre-drilling. It is also often used for tilting operations, especially when processing difficult materials such as titanium and other light alloys.

Round insert tool – insert dimension 12

Cutting range 32-100 mm (1.25-4 inches)

Maximum cutting depth of 6 mm (. 236 inches)

Recommended cutting depth of 3 mm (. 118 inches)

Up to 16 cutting edges

Round ball cutter mould and mould

We provide all kinds of high productivity circular cutting machines for all materials and applications, from general use to partial tools. The design of the ball cutter is designed to improve the performance and reliability of the copy milling machine.

Ballnose K = 1-3 frontiers, single side insertion

Cut range 16-40 mm (. 625-2in.)

90 degrees and HFA (lollipop)

An effective frontier

 

Ball cutter K =2 – tip, single – side insertion

Tool range 12-50mm (. 5-2 inches)

90 degrees

2 effective cutting edge

 

Conical conical shape. 2 tip, single side insertion

Cutting range 12.7-25 mm (0.5 inch)

4 c cone

2 effective cutting edge

For aluminum – 2 – tip, single – side insertion

High productivity tools are designed to provide optimal performance in aluminum slotting, shoulder and pocket operations. These tools are specially optimized to achieve high speed and high metal cutting rate of aluminum.

Copy aluminum – insert 12

Knife range 25-50 mm

Maximum depth 7.5 mm (. 295 inches)

Excellent ability to increase

Mirror polishing insertion

 

Copy aluminum – insert size 22

Cutting range 32-100 mm (1.25-4 inches)

Maximum cutting depth of 10mm (. 393 inches)

Excellent ability to increase

Mirror polishing insertion

Duplicate mills

We provide a wide range of high performance tools for 3D milling applications, from small parts milling to heavy-duty milling in heavy milling machines.

Our cutting tools are designed and manufactured to meet customer requirements for quality, proximity to tolerance and continuous performance. We provide a complete range of products for all industries, including aerospace, molds and molds, power generation, etc.

The circular insert cutter of general copying milling cutter. Single insert

Our full range of blades, r217/220.29, is ideal for semi-finishing and rough machining of all the applications and materials for milling.

Round insert tool – insert size of 05

Knife range 10-20mm

Maximum cutting depth of 2.5mm (. 1 inch)

Recommended cutting depth of 1 mm (. 4 inches)

 

Round insert tool – insert dimension 06

Knife 12-40 mm range

Maximum cutting depth of 3 mm (. 118 inches)

Recommended cutting depth of 1 mm (. 4 inches)

 

Round insert tool – insert dimension 07

Range 16-25 knife range mm

Maximum depth of 3.5 mm. 137 inches)

Propose cutting depth of 1.5mm (. 059 inches)

 

Round insert cutters – insert dimensions 08

Knife 16-50 mm range

Maximum cutting depth of 4 mm (. 158 inches)

Propose cutting depth of 1.5mm (. 059 inches)

 

Round insert tool-insert size of 10

Cutting range 20-50 mm (1-1.5 inches)

Maximum cutting depth of 5 mm (. 197 inches)

Recommended cutting depth of 2 mm (. 079 inches)

 

Round insert tool – insert dimension 12

Cutting range 25-137 mm (1-6 inches)

Maximum cutting depth of 6 mm (. 236 inches)

Recommended cutting depth of 3 mm (. 118 inches)

There might be four and six indexes

 

Round insert tool – insert size 16

Cutting range 32-160 mm (1.25-6.299 inches)

Maximum cutting depth of 8 mm. 315 inches)

Suggested cutting depth of 5 mm (. 197 inches)

 

Round insert tool – insert dimension 20

Cutting range 40-250mm (1.575-9.843 inches)

Maximum cutting depth of 10mm (. 394 inches)

Recommended cutting depth of 6 mm (. 236 inches)

 

single side insertion

QUATTROMILL – 4 – front, single side insertion

QuattroMill ™ is a generic face milling cutter. It is a simple solution, each cutter has more teeth, improves production efficiency, easy to use, reliability and precision, for the entire face milling application and materials.

The QuattroMill feature is a powerful square insert that meets the needs of the most challenging applications, and a powerful central locking screw and a quick insertion position make it easy to replace inserts. The cutter body is coated and prehardened, providing a large chip space for steel and stainless steel processing. Positive cutting rakes/negative radial rakes maximizes the ability of machine tools and increases productivity in stable and unstable conditions.

QuattroMill can cover all operations in a wide range of grades and geometric shapes. It can be configured in three different pitches: rough, normal and close, and the diameter of the diameter from 63 to 200 millimeters (2.48 “-7.87”).

Quattromill – insert size 09

Tool range 20-500mm (0.75-4)

Maximum cutting depth of 4.5 mm(0.177 inch)

Recommended depth of 3 mm (0.118 inch)

Cutting edge, single side insertion

Quattromill – insert size 12

Cutting range 40-500 mm (1.5-8 inches)

Maximum cutting depth of 6 mm (0.236 inches)

Recommended depth of 4.5 mm(0.177 inch)

Cutting edge, single side insertion

 

Quattromill – insert size 15

Cutting range 63-500mm (3-8 inches)

Maximum depth of 7.5 mm(0.295 in)

Recommended depth of 6 mm (0.236 inches)

Cutting edge, single side insertion

Flour mill – near 90-8 tip, double-sided insertion

The R220.88 cutter, which is inserted with SNMU, provides high cutting ability and the eight edges of each inserted economy. These tools have strong performance in machining of steel and cast iron, which can be divided into 12 and 16 types. The tool is suitable for rough machining and semi-finishing.

174/5000

Flour mill – near 90 – insert size 12

Cutting range of 50-160 mm (2-6 inches)

Maximum cutting depth of 9 mm (0.354 in)

Recommended depth of 6 mm (0.236 inches)

Cut edge, double side insertion

 

Flour mill – near 90 – insert size 16

Cutting range of 63-160 mm (2-5in)

Maximum cutting depth of 13mm (0.511in)

Recommended depth of 8 mm (0.315in)

Cut edge, double side insertion

cutting materials

The flour mill of advanced cutting materials

Seco offers a variety of options for face milling, using advanced cutting materials that allow you to take advantage of these tools, such as higher cutting speed. PCBN, PCD, and ceramics provide an unbeatable improvement for the surface milling productivity when applicable to appropriate applications.

SEEX1204AFTN-D16-LF CBN200

SNEN0903ENS-M08 CBN200

RNGN090300S CBN200

SEEN1203AFTN-D16 CBN300

SNEX120312ZZ CBN200

DISC MILLS

Our wide standard disk milling cutter, insert radius, geometry and grade, solves any challenge posed by the disc grinding application.

We are in the industry the most widespread type of plug, blade and accessories, we are your monophyletic tool supplier, used for cutting, t slot, slot, deep slot, slot, double radius after facing, circular or spiral interpolation, shoulder milling, ring groove groove and copying milling. Our products are developed through extensive research to ensure that they meet the needs of today’s materials and processes.

Although our standard disk milling cutter covers most applications, we also provide special design and manufacturing solutions for specific industries. The gear cutting tool including power generation industry, automotive crankshaft milling, many typical aerospace components of large diameter cutter solution, used in the oil and trachea cutting cutting machine, and made of artificial hip joint circular insert tool.

335.14 – small disc width 0.07-5.15mm (. 027 -. 202 inches)

Smaller diameter mills

The carbide head system can be exchanged to help control the processing cost

Cutting width: 0.7-5.15mm (0.043-0.202 inch)

Diameter of insert range 9.7-34.7 mm (. 381-1.36 inches)

Slot, cut Angle and radius

 

335.15 – shallow groove width: 1.1-5.15mm (. 043 -. 202 inches)

Designed as a circular buckle

Cut width 1.1-5.15mm (. 043 -. 202 inches)

Cutting range of 24-63 mm (1-2.5 inches)

Optical cutting design

 

335.10-width 2.25-4.1 mm (.088 -). 161 inches)

For fine cutting and cutting operations

Self-clamping insert design

Cutting width 2.25-4.1 mm (. 088 -. 161 inches)

Cut diameter 40-315 mm (1.5 to 12 inches)

Internal coolant

 

335.19 – width 4-12 mm (.157 -). 500 inches)

Economy, precision, free cutting of small widths

Cut width 4-12 mm (. 157 -. 500 inches)

Cut diameter 40-250mm (1.5-8 inches)

Insert corner radius 0.2-6mm (. 008-0.236 inches)

4 a cutting edge

 

335.18 – width 8-20mm (.315 -)750 inches)

Economical, versatile and discretionary cutting solutions

Fixed and adjustable pocket design

Cut width 8-20mm (. 315 -. 750 inches)

Cut diameter 32-315 mm (1.25-12 inches)

Insert Angle radius 0.4-4 mm (. 016 -. 16 inches)

4 a cutting edge

 

335.25 – width 13.5-32mm (0.512-1.25 inch)

Economical, multi-talented, free cutting wide – width cutting scheme

Fixed and adjustable pocket design

Cutting width 13.5-32 mm (0512-1.25 inches)

Cut diameter 80-315 mm (4-12 inches)

Insert Angle radius 0.4-6 mm (. 016-0.236 inches)

4 a cutting edge

Internal coolant

 

335.29 – round insert tool 5-12mm (. 197 -. 472 inches)

Full radius round milling cutter

Cut width 5-12 mm (. 196 -. 472 inches)

Cut diameter 25-80 mm (1.5-2 inches)

Internal coolant

 

335.16-t slot cutter

Economy and free cutting disk milling

Cut width 11-21 mm (. 39 -. 83 inches)

Tool range diameter 25-50mm (. 97-1.84 inches)

4 a cutting edge

Internal coolant

Eight Angle eight blade

Eight Angle eight blade, single side insertion

Octomill ™ ’05 and’ 07 to provide the most comprehensive market scope of face milling cutter.

Designed to handle many applications, Octomill 05 and 07 provide high performance and process security. These tools are processed in medium to rough cutting steel and stainless steel. Because of the lower cost of each cut edge, the knife has 8 edges, which is more economical than the traditional tool.

Octomill 05 is a perfect match for a small machine with a maximum of up to 15HP, with small parts/depths. Octomill 07 is the ideal medium sized machine at 15HP to 25HP range.

Octomill – insert size of 05

Cutter range 32-315 mm (1.25-5 inches)

Maximum depth of 3.5 mm(0.138 inch)

Recommended depth of 2.5mm (0.098 in)

Cutting edge, single side insertion

 

Octomill – insert size 07

Cutter range 50-315mm (2-5in)

Maximum cutting depth of 5 mm (0.197 in)

Recommended cutting depth of 4 mm (0.157 in)

Cutting edge, single side insertion

93/5000

Flour mill finish – 4 tip, single – side insertion

Seco offers a full range of flour mills for the application. These cutting machines are good at providing high surface finish to meet strict requirements, such as found on the engine cylinder cover. This product range includes a fixed pocket and adjustable version.

HEXAMILL’s heavy – 6 tip, single – sided insertion

Hexamill has expanded Seco’s face milling cutter and paneling to become the widest and most competitive product in the market.

Hexamill r220.66-12 has hexagonal insert, suitable for machining center and similar machines with minimum 25 HP and minimum ISO 50 taper size. These tools have an advantage over a large cut depth, and there are six cutting edges, which provide a lower price than the traditional face milling cutter.

HPMR1206ZETR-M17 T350M

HPMR1206ZETR-M17 MP2500

HPMN1206ZETR-MD20 MP2500

HPMR1206ZETR-ME15 F40M

HPMN1206ZETR-MD20 MK1500